LAVAZZA DESEA - Page 72

72
ITEN
TROUBLESHOOTING
Problem encountered Possible causes Solution
The machine is very noisy. » Machine not is on a flat and stable
surface.
» Power supply cable incorrectly
positioned.
» Movable parts not fitted properly.
» No water in the tank.
» Capsule not present
» Check the surface.
» Check the correct position of the
cable into the base of the machine.
» Fit the movable parts properly.
» Top up the tank with fresh drinking
water.
» Insert Lavazza A MODO MIO
capsule or compatible.
IF THE PROBLEM REMAIN
PLEASE CONTACT LAVAZZA
CUSTOMER SERVICE.
Unit ready for use and failing to
acknowledge the button press.
» Wrong button press/activation.
» Used capsule collection tray not
fitted.
» Press one of the illuminated buttons
with your fingertip, then check the
availability of the acoustic signal (if
activated) and the proper blinking of
the selected icon.
» Check the correct insertion of the
tray, with the resulting alarm warning
lamp switch-off. Check for correct
supplying.
IF THE PROBLEM REMAIN
PLEASE CONTACT LAVAZZA
CUSTOMER SERVICE.
The lever remains closed after the
supply.
» Used capsule tray full. » Empty the tray and try to open the
lever.
IF THE PROBLEM REMAIN
PLEASE CONTACT LAVAZZA
CUSTOMER SERVICE.