LAVAZZA EP950 - MACHINE SET-UP; MACHINE START UP

EN
MACHINE SET-UP
1
Lift out the water tank and open the lid.
2
Fill the water tank up to the MAX level indicated
using only fresh, non-bubbly, drinking water.
MAX
MIN
Hot water and other liquids can damage the tank.
Do not operate the machine without water; ensure
that the water level is above the MIN indicator.
3
Plug in the machine and press the general
switch, setting it at the I position. The on-off led
will light up.
When the coffee dispenser button lights up, the
machine is ready.
Thecompanywillnotberesponsibleforany
damagesinthefollowingcases:
• incorrectuseandnotinconformitywiththe
intended purpose;
• repairsmadebyotherthananauthorised
 servicefacility;
• tamperingwiththepowercable;
• tamperingwithanypartofthemachine;
• useofsparepartsandaccessoriesother
 thantheoriginals;
• failuretodecalcify;
• storageinaplaceatatemperature
 below0°C;
• useofcartridgesotherthanthoseindicated.
Theguaranteeisnolongervalidinthese
cases.
MACHINE START UP
Position the machine on a flat stable surface away
from sources of water and heat. Ensure that the
machine is disconnected from power supply. Any
damages caused to the machine through failure
to follow these instructions are not covered by the
guarantee.
The lid of the water tank has a key-operated lock.
Rotate anti-clockwise to open the lid, and clock-
wise to close it.
CLOSED POSITION OPEN POSITION
The use of a water filter
(an optional accessory)
improves water quality
and prolongs machine life.
Use the AquaAroma
Crema Brita for Lavazza
filter.
In order to insert the filter,
follow the instruction
sheet which comes with
the accessory.