LAVAZZA Tiny ECO - Machine Operation and Stand-by; Switching the Machine On; Stand-by Functionality; Initial Hydraulic Circuit Wash

24
ITEN
Press the SWITCHONSTANDBYSUPPLY
button to switch the machine on.
The button will start blinking , wait until the but-
ton remains ON to a steady white light .
The hydraulic circuit must be washed upon the first
machine start. Place a suitable container under the
dispenser, then press the button to start delivering
at least one tankful of water and press it again to
stop delivering. Do not insert the capsule!
STAND-BY FUNCTION
To ensure the energy conservation the machine auto-
matically passes to the STANDBY mode after 2 min-
utes of not being used.
The machine can be switched off before the 2 min-
utes’ period elapses by keeping the SWITCHON/
STAND-BY/SUPPLY button pressed down
over at least 3 seconds. The STAND-BY status will
be notified by the button switch-off .
Pressing the SWITCHONSTANDBYSUPPLY
button again will start the machine up again .
MACHINE SETTING
3 sec.