28
ITEN
MAINTENANCE AND CLEANING
COFFEE DISPENSER
To clean the dispenser, perform a weekly coffee
brewing procedure without inserting the capsule.
Press SWITCHONSTANDBYSUPPLY button
and deliver 1 cupful of water (approx. 2.1 fl oz/60 ml),
then press it again to stop delivering.
DRIP TRAY DRAWER
Remove the cup supporting grid, then disassemble
and empty the drop collecting tray.
Regularly verify that the drop collecting tray is not full,
in order to avoid liquid overspill.
WATER TANK
Do not leave water in the tank and water circuit for
more than 3 days.
Remove and empty, every 2 or 3 days, the water tank,
rinse and fill it up again with fresh water.
Carry out a supply operation (with no capsule) prior
to delivering a coffee or a beverage.