LAVAZZA Tiny ECO - Troubleshooting Coffee Quality and Controls; Cold Coffee Problems; Coffee Pours in Drops; Pod Holding Tray Locked Issues

33
EN
TROUBLESHOOTING
Problem encountered Possible causes Solution
The coffee is cold. » Coffee pours out in drops,
water circuit clogged.
» The machine has limescale
build-up.
» Run the machine washing cycle.
» Descale the machine.
» If the problem remain please contact Lavazza
Customer Service.
Coffee pours out in drops. » Faulty capsule.
» Pump working improperly.
» Spout/water circuit clogged.
» The machine has limescale
build-up.
» Replace the capsule.
» Check for abnormal noise of the machine.
» Clean the coffee dispensing spout
(see MAINTENANCE AND CLEANING).
» Descale the machine.
» If the problem remain please contact Lavazza
Customer Service.
Pod holding tray locked. » Tank not inserted correctly. » With the machine turned on, insert the water
tank correctly and wait until the white light in the
SWITCHON STANDBY SUPPLY button stops
flashing and becomes steady .
» If the problem remain please contact Lavazza
Customer Service.
The button is not working and
the relevant LED is off.
» Mechanical blocking. » Try to power the machine off by disconnecting the
power plug for 10 seconds then reconnect it.
Power the machine on and check the correct
operation of button.
» If the problem remain please contact Lavazza
Customer Service.
Contact Lavazza Customer Service for any problem or failure not included in the above list.