Need help?Do you have a question about the LaView LV-D2116CS Series and is the answer not in the manual?
Guides through initial device setup using the setup wizard, including network and HDD configuration.
Explains the purpose and function of the live view mode.
Covers basic operations like single/multi-screen, auto-switch, and using the mouse.
Sets up essential parameters like baud rate and camera selection for PTZ operation.
Defines stream type, resolution, quality, and bitrate for video recording.
Sets up recording schedules for different times and event types.
Configures motion detection areas, sensitivity, and triggers for recording.
Protects recorded files by locking them or setting HDDs to read-only.
Covers methods to play back recorded video, including by channel, time, event, or tag.
Allows playback of recorded video for a selected date and time.
Provides methods to back up recorded files using quick export, normal search, or event search.
Offers a fast method to export selected recorded video files to backup devices.
Details backing up recordings by searching through normal video data.
Configures motion detection areas, sensitivity, and triggers for recording or other actions.
Sets up detection for video signal loss and configures corresponding alarm responses.
Detects tampering with the camera lens and triggers alarm responses.
Configures basic network parameters like IP address, subnet mask, and DNS.
Covers advanced network configurations including PPPoE, DDNS, NTP, SNMP, UPnP, ports, and email.
Explains the process of initializing a newly installed hard disk drive.
Covers firmware upgrades via local backup devices or FTP servers.
Resets the device to its factory default settings, excluding network parameters.
General| Compression | H.264 |
|---|---|
| Operating System | Embedded Linux |
| Channels | 16 |
| Video Input | 16 BNC |
| Video Output | HDMI, VGA |
| Recording Resolution | 1080p |
| Hard Drive Support | Up to 6TB |
| Audio Output | 1 channel |
| Network | RJ45 10M/100M Adaptive Ethernet interface |
| USB Interface | 2 USB 2.0 |
| Power Supply | DC 12V |
| Operating Temperature | -10°C to 55°C |
To Next Page
