Need help?Do you have a question about the LaView LV-T8216YHS and is the answer not in the manual?
Details preparation steps for installation, including tools and screws.
Provides instructions for DVR installation, including rack mounting and cable connections.
Explains how to install the hard disk drive (HDD), including precautions and tools.
Explains wiring for alarm input and output, including DC and AC load diagrams.
Details how to connect alarm devices and PTZ/controller via RS-485.
Explains the procedures for powering the DVR on and off.
Guides on controlling and configuring PTZ cameras.
Details how to configure and manage recording settings.
Guides on configuring detection settings for alarms like motion and video loss.
Covers basic video settings such as channel name, timestamp, and display options.
Guides on adding and configuring network cameras.
Covers basic recording settings like record mode, HDD full handling, and prerecord.
Covers basic network settings like DHCP, IP address, subnet mask, and gateway.
Guides on configuring PTZ connection parameters like protocol and baud rate.
Explains how to configure video detection alarms, including channel, type, and sensitivity.
Covers storage management, HDD formatting, and record settings.
Guides on connecting and logging into the DVR via a web browser.
Lists common DVR faults and their possible solutions.
To Next Page
General