To Next PageTo Next PageWhy my Lavor LANDER 2800 Pressure Washer pump doesn’t reach the necessary pressure?
If the pump of your Lavor Pressure Washer doesn’t reach the necessary pressure, the water inlet filter might be clogged; clean it. If the suction/delivery valves are clogged or worn out or the lance nozzle is incorrect or worn out, contact an authorised service centre or check and/or replace the lance nozzle.
What to do if water is leaking from the Lavor LANDER 2800 pump?
If water is leaking from the pump of your Lavor Pressure Washer, it is probably because the sealing is worn out. Contact an authorised service centre.
What to do if my Lavor Pressure Washer has loss of pressure?
If your Lavor Pressure Washer is losing pressure, the nozzle might be worn out, so try replacing it. Also, the filter may be dirty; in this case, check and clean it.
Why is the pressure fluctuating on my Lavor Pressure Washer?
If you notice fluctuating pressure in your Lavor Pressure Washer, it might be due to air intake. Ensure that connections and the locking ring are well tightened. If the valves are dirty, worn out, or stuck or the sealing is worn out, contact an authorised service centre.
How to fix a noisy Lavor Pressure Washer?
If your Lavor Pressure Washer is making unusual noise, check the intake pipes, as it might be due to air intake. Also check and clean the filter if it is dirty. If the valves or bearings are worn out, dirty, or blocked, or if the water temperature is too high, contact an authorised service centre or bring the temperature under 40° C.
How to unblock a Lavor LANDER 2800 lance?
To resolve a blocked lance on your Lavor Pressure Washer, clean the nozzle with the pin included in the unit.
Why is there water in the oil of my Lavor Pressure Washer?
If there is water in the oil of your Lavor Pressure Washer, it could be because the O-rings (water and oil) are worn out, in this case, contact an authorised service centre. Alternatively, if there is high moisture in the air, replace the oil with double the suggested frequency.
What causes water leakage from the head of a Lavor LANDER 2800?
If water is leaking from the head of your Lavor Pressure Washer, it could be because the seals or O-rings seal system are worn out. Contact an authorised service centre.
General| Max Pressure | 2800 PSI |
|---|---|
| Hose Length | 25 ft |
| Weight | 12.5 kg |
| Water Flow Rate | 510 l/h |
| Water Flow | 510 l/h |
| Nozzles Included | 4 |
List and identification of the numbered parts of the high pressure washer.
Explanation of the caution symbol and its purpose in highlighting hazardous procedures.
Explanation of the note symbol and its purpose in providing helpful information.
Key safety warnings related to operation, maintenance, and general use of the appliance.
Precautions regarding appliance use with children, hose handling, and exhaust risks.
Information on the intended non-professional use, operating environment, and temperature limits.
Guidelines for proper placement, handling, and operation of the pressure washer.
Explanation of the safety lock on the gun and its function.
Instructions for connecting the suction hose and using liquid detergents.
Details on different nozzle types and their applications for cleaning various surfaces.
Description of the thermal valve's function for by-pass operation and water discharge.
Reference to assembly instructions shown in figures.
Guidance on engine oil level, pump oil, and initial operation with suction hose.
Information on connecting the water supply and additional safety requirements.
Steps for connecting the high-pressure hose and starting the unit to eliminate air.
Instructions for setting fuel cock, engaging choke, and pulling the starter handle.
Detailed steps for starting the engine, including choke lever adjustments.
Procedure for stopping the engine and releasing pressure in the hose.
Recommendations for motor and high-pressure water pump lubrication and oil type.
Instructions for periodically checking the water suction filter for blockages.
Advice on preparing the machine for long-term storage, including antifreeze.
Guidance on seeking assistance for repairs or replacement of original spare parts.
Information on the correct disposal of the product and its accessories according to WEEE directive.
Details on warranty coverage, exclusions, and conditions for the pressure washer.
Common causes and repairs for low or fluctuating pump pressure.
Troubleshooting steps for water leaks from the pump and loss of overall pressure.
Diagnosing noise issues and water contamination in the oil.
Solutions for a blocked lance, including nozzle cleaning.
Declaration of conformity, product details, and compliance with EC/EU directives and standards.
Specifications for measured and guaranteed sound power levels (LwA).
Statement of conformity with EC/EU directives and EN standards, including model details.
Information on where to find the technical documentation for the machine.
