7. T ur n the w ater off and remo v e the coupling
from the w ashout fitting .
Note: If the mo w er is not clean after one
w ashing, soak it and let it stand for 30 min utes .
T hen re peat the process .
8. R un the mo w er ag ain for one to three min utes
to remo v e ex cess w ater .
A br ok en or missing w ashout fitting
could expose y ou and other s to thr o wn
objects or blade contact. Contact with
blade or thr o wn de bris can cause injur y
or death.
• R eplace br ok en or missing w ashout
fitting immediatel y , bef or e using
mo w er a gain.
• Plug an y hole(s) in mo w er with bolts
and lockn uts.
• Nev er put y our hands or feet under
the mo w er or thr ough openings in
the mo w er .
35
To Next Page
Loading...