6
IMPORTANT SAFETY INSTRUCTIONS
■
Never run the unit without the proper equipment attached. Always ensure the blower tubes are installed.
■ When not in use, the blower/vacuum should be stored indoors in a dry, locked up place, out of the
reach of children.
■ Maintain tool with care. Keep fan area clean for best and safest performance. Follow instructions for
proper maintenance.
■ Do not attempt to clear clogs from tool without rst unplugging it.
■ If the power supply cord is damaged, stop using the unit. Take the unit to a qualied service dealer
for inspection and possible repair.
DOUBLE INSULATION
The blower is double insulated to provide a double thickness of insulation between you and the
tool’s electrical system. All exposed metal parts are isolated from the internal metal motor components
with protective insulation.
NOTE:
Servicing of a product with double insulation requires extreme care and knowledge of the
system and should be performed only by a qualied service technician. Take the unit to a qualied
service dealer for inspection and possible repair using only identical replacement parts.
The double insulated system is intended to protect the user from shock resulting from a break in the
tool’s internal insulation. Observe all normal safety precautions to avoid electrical shock.
WARNING
USE ONLY IDENTICAL REPLACEMENT PARTS WHEN SERVICING THE BLOWER TO AVOID INJURY.
WARNING
DOUBLE INSULATION DOES NOT TAKE THE PLACE OF NORMAL SAFETY PRECAUTIONS
WHEN OPERATING THIS BLOWER.
WARNING
THIS BLOWER IS FOR OUTDOOR USE ONLY. DO NOT EXPOSE TO RAIN OR USE IN DAMP
LOCATIONS.
WARNING
To Next Page
Loading...
