LawnMaster CLMB4016K - Handle Tilt Adjustment; Emptying the Collection Bag; Installing the Mulching Plug

ASSEMBLY
18
HANDLE TILT ADJUSTMENT
■ The tilt of the handle can be adjusted.
■ Secure the lower handle [6] with the locking lever [4] according to your preference (Fig. 12).
EMPTYING
Empty the collection bag (15) frequently during use. Do not wait until it is completely full.
We recommend emptying it when it is half full.
INSTALLING THE MULCHING PLUG
The mulching insert prevents grass from being collected by blocking the collection chute.
This allows the grass clippings to be deposited back on the lawn during cutting.
Do not attach the collection bag (15) and the mulching insert at the same time.
■ To lift the safety flap (14) and detach the grass collection box.
■ Open the safety flap (14), hold it in position and insert the mulching plug into the rear discharge
chute (Fig. 13). Ensure the unlock button snaps into place, as picture shown (Fig. 14 ).
■ Press the unlock button to release and remove the mulching plug (Fig. 15).
Fig. 13 Fig. 14 Fig. 15
Fig. 12
22
14
14