LawnMaster CLMF4841E - Assembling the Grass Collection Bag; Attaching and Removing the Grass Collection Bag; Grass Collection Full Indicator; Attaching and Removing the Mulching Plug

18
ASSEMBLY
Assembling the Grass Collection Bag
(See Figs. 3-4)
Your mower comes with a tool free grass collection bag.
■ Check the collection bag before assembling to make sure there is no damage.
■ Insert the handle into the slots on the upper cover of grass collection bag. Ensure this securely
'clicks’ into place (Fig. 3).
■ Fully insert the rods of the metal frame into the slots on either side of the plastic base of the
grass collection bag. Secure the metal support rods into the xing position on either side of
the grass collection base. Ensure the side clamping sleeves are properly xed onto the metal
support frame (Fig. 4).
■ There is a hole in the bottom of the grass collection bag to hang it up if required.
Attaching/Removing the Grass Collection Bag
(See Fig. 5)
NOTE:
When using the grass collection bag, do not install the mulching plug. The mulching plug
MUST be removed prior to installing the collection bag. The mulching plug is supplied tted in the
collection chute of the mower.
NOTE:
The deector guard is spring operated. Ensure you have a rm grip when opening and
closing to avoid personal injury.
■ Lift the deector guard all the way up with one hand.
■ Attach the grass collection bag onto the mounting brackets provided at the back of the
lawnmower. Align the bottom of the grass collection bag rst ensuring the collection tongue is
located fully within the discharge chute of the lawnmower (Fig. 5).
■ Lower the deector guard onto the grass collection bag - it will keep it in place.
■ To remove the grass collection bag, lift the deector guard and unhook the grass collection bag
from the mounting brackets. Carefully release the deector guard back down.
NOTE:
Under normal usage, bag material is subject to wear. To reduce the risk of injury, frequently
inspect the bag assembly and replace if there are any signs of wear or deterioration.
Grass Collection Full Indicator
(See Figs. 6-7)
The grass collection full indicator is a small ap located on the side of the grass collection box.
■ If the grass collection box is empty or partially full, the grass full indicator ap will remain open
(Fig. 6).
■ When this ap remains closed it means that the grass collection bag is full and needs to be
emptied (Fig. 7).
Attaching/Removing the Mulching Plug
(See Figs. 8-9)
Do not at any time make any adjustment to the lawnmower without rst stopping the motor and
removing the isolator key and batteries.
WARNING