EasyManua.ls Logo

LawnMaster CLMF4841E - Operation; Setting the Cutting Height

LawnMaster CLMF4841E
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
OPERATION
Setting the Cutting Height
(See Fig. 12)
Switch off the equipment, remove the isolator key and wait for the blade to come to a complete
stop before adjusting the cutting height. A rotating blade can cause injury. Keep your feet away
from the deck when adjusting its height.
WARNING
Before using the mower for the rst time, adjust the cutting position to the height best suited for
your lawn.
The mower can be set to 6 cutting heights between 22mm and 72mm. Choose the appropriate
cutting height according to the types and conditions of the grass. For the rst cut each season, a
higher cutting setting should be selected.
Do not allow familiarity with this type of product to make you careless. Always pay attention when
operating this product, not doing so can result in serious injury.
Always wear safety goggles or safety glasses with side shields when operating this product.
Failure to do so could result in objects being thrown into your eyes, resulting in possible serious
injury.
Do not use any attachments or accessories not recommended by the manufacturer of this product.
The use of attachments or accessories not recommended can result in serious personal injury.
WARNING
WARNING
WARNING
CUTTING POSITION CUTTING HEIGHT
1 22mm
2 32mm
3 42mm
4 52mm
5 62mm
6 72mm

Related product manuals