22
MAINTENANCE
STORAGE
■ Disconnect the tool from the power supply.
■ Store the tool in a clean, dry place out of the reach of children.
■ Allow the motor to cool down before placing the tool in a closed room.
■ Do not wrap plastic sacks around the tool as this could result in the formation of moisture.
■ To store the tool, lower the handle before storing:
- Remove and clean the collection bag.
- Fully loosen the wing nuts on the sides of the upper handle and fold the upper handle down (Fig. 15).
- To save space, the collection bag can be put on the tool (Fig. 16).
NOTE:
Ensure that the power cord is not squeezed.
Fig. 15 Fig. 16
To Next Page
Loading...
