LawnMaster GVB1316 - Troubleshooting; Tool Does Not Start

23
TROUBLESHOOTING
Suspected malfunctions are often due to causes that the user can x themselves.
Therefore, check the product using this section. In most cases the problem can be solved quickly.
WARNING
Only perform the steps described within these instructions!
If further assistance is required, please call Customer Service at 866-384-8432. All further inspection,
maintenance and repair work must be performed by an authorized service center.
PROBLEM POSSIBLE CAUSE SOLUTION
Tool does not start.
No power.
Check power socket, cord, line; repair
only by qualied electrician.
Defective power cord.
Call Customer Service for assistance
(Toll-free number 866-384-8432).
Safety switch button is not
pressed.
Press and hold the safety switch button.
Pull the start/stop bale switch toward the
handle and release the safety switch button.
Start/stop bale switch
defective.
Call Customer Service for assistance
(Toll-free number 866-384-8432).
Carbon brushes worn out.
Motor defective.
Abnormal noises, clatter
or vibrations.
Foreign object in the
cylinder.
Remove the foreign object .
Damaged spring tines or
cylinder knives.
Exchange the cylinder.
Cylinder incorrectly
mounted.
Install the cylinder correctly. See
Changing the Cylinder on page 18.
Toothed-belt slip.
Call Customer Service for assistance
(Toll-free number 866-384-8432).