Need help?Do you have a question about the LAZER JACKAL and is the answer not in the manual?
Guide Velcro straps through the helmet's top vent as illustrated in figure a.
Pull the strap upwards through the vent located next to the initial one, as shown in figure b.
Loop the strap through the action camera mount, following the depiction in figure c.
Tighten the strap and secure the Velcro to itself as demonstrated in figure d.
Pry off the plastic caps covering the visor bolts using a fingernail or small flat-headed screwdriver.
Tighten bolts clockwise with a coin, flathead screwdriver, or 4mm hex key after removing caps.
Slide the upper part of the magnetic buckle sideways away from the lower part to open it.
Bring the upper and lower parts of the magnetic buckle close together to engage the magnets.
Damaged Lazer helmets are replaced with a new one following a crash. Proof of purchase is required.
Return for a replacement helmet or refund if not completely satisfied within 30 days.
Provides guidelines on helmet fit, maintenance, limitations, and proper usage for cycling.
General| Brand | LAZER |
|---|---|
| Model | JACKAL |
| Category | Motorcycle Accessories |
| Language | English |
To Next Page
