LCI HappiJac User Manual

8 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

HappiJac

®

Wireless Remote

OWNER'S MANUAL

Table of Contents

Questions and Answers:

M
Mrs. Elizabeth Francis DDSAug 4, 2025
How to fix an LCI Remote Control that will not turn on and has no green light?
- J
  julie32Aug 4, 2025
  If your LCI Remote Control isn't turning on and there's no green light, it could be due to a dead or weak battery. Remove the six screws from the back of the remote and replace the AA battery. As a temporary solution, you can plug in the coiled phone cord between the remote and receiver until you replace the battery. If these steps don't work, the remote may be defective and need replacement.
J
Jerry OlsonAug 14, 2025
What to do if the green light is on the LCI Remote Control but the jacks won't operate?
- N
  Nicholas BooneAug 14, 2025
  If the green light is on but the jacks aren't working, the receiver might need a reset. Try pressing the ACC. IN and ACC. OUT buttons simultaneously. Alternatively, there might be insufficient power to operate the jacks, indicated by a red light on the receiver panel. In this case, charge the camper battery or plug into AC power if available.
C
calebmontesAug 23, 2025
What to do if one or more jacks will not operate on my LCI Remote Control?
- N
  nestradaAug 23, 2025
  If one or more jacks aren't working, the issue might be blown fuse(s) on the receiver board. Replace the blown fuse(s). If the fuses continue to blow, contact LCI.

LCI HappiJac Specifications

General

Brand	LCI
Model	HappiJac
Category	Remote Control
Language	English

Summary

Preparation

Initializing the System

Steps to initialize the remote and receiver for the Happijac system.

Operation

Safety Features

Discusses important safety considerations and warnings for operating the system.

Overcurrent Shutdown

Explains how the system shuts down when a jack reaches its travel limit.

Operational Time Out

Feature that stops operation after one minute of continuous button use.

Idle Time Out

Feature that automatically shuts down the system after two minutes of inactivity.

Manual Jack Operation

Procedure for manually operating jacks when the system malfunctions or battery is low.

Troubleshooting

Loading and Unloading Tips

Maintenance

Jacks

Guidance on oiling jacks for improved performance after extended periods of non-use.

Remote

Instructions for keeping the remote dry and storing it properly.

Notes

Related product manuals

Preview: LCI Floe 636