LCT 79cc - Engine Model Number & Serial Numbering System; Engine Serial Number Sequence; LCT Engine Model Numbering System Definition

Copyright © 2018 Liquid Combustion Technology, LLC LCT Engine Service Manual: 79, 136, 179, 208, 254, 291, 306, 369, 414 & 420cc 2
The rst two lines of an engine’s number is the model number. It is alphanumeric and engraved on the side of the block to the right of
the recoil. The third line is alphanumeric and is also the serial number.
LCT Engine Model Numbering System Definition (see chart on page 3):
1. Preproduction - This column is coded and reserved for prototype engines only.
2. Plant - This column is coded and used for LCT internal use only.
3. Design Family - This column is used for emissions regulations and coded for LCT internal use only.
4. Crankshaft - This column indicated whether the PTO shaft (crankshaft) is congured in the engine horizontally or vertically.
5. Shaft - This column is used for the description of the PTO shaft. This will aid in determining what will be the engine’s primary use.
6. Shaft Detail - This column references a chart that designates which LCT engineering drawing corresponds to the PTO shaft.
This is for LCT internal use only.
7. Horsepower - This column is coded to designate the engine’s power output (horsepower) with its corresponding size
(cubic centimeters).
8. Paint Code - This column is coded to which color scheme the engine is equipped with.
9. Starter Type - This column is coded to which type of starting system the engine is equipped with.
10. Options - This column is coded to designate which equipment options the engine is equipped with.
11. Emissions Label - This column is coded for the emissions standards the engine meets.
12. Pack Code - This column is reserved for LCT Packaging Department only.
NOTE:
The LCT Engine Model and Serial Number Systems is subject to be changed or edited at any time.
Engine Model Number & Serial Numbering System
Engine Serial Number Sequence
16 95H 03 00001 A:
Example:
Engine Serial Number 1695H0300001A represents:
16: 2016
95H: 306cc Horizontal Engine Series
03: March
00001: 1st Engine Produced During Month of March
A: Horizontal Assembly Line
Assembly Line Designation (A, B, C, D)
Sequential Engine Number
Produced Month
Engine Series Designation
Produced Year