EN-122
LBN458POP LMN180POVP
Connecting the power supply
Your cabinet is designed for operation with 230 V single-phase.
It must be connected to a wall socket equipped with earthing and protected by a 10 A fuse in
compliance with the standard NF C15-100 and in compliance with your electricity supplier's
prescriptions.
SPECIFIC INFORMATION
- We recommend that you install your wine cabinet in a temperate room.
- If the inside light remains on, please note that the inside temperature will be higher.
- Temperature inside the wine cabinet may vary depending on the type and the number of bottles
contained.
- In order to keep your wines at a stable temperature, avoid leaving the door open for long periods.
- Do not install your wine cabinet close to a heat source; avoid direct sunlight.
- In order to guarantee your safety, and to prevent your wine being spoilt, do not place the cabinet in
humid locations.
- Do not store perishable foodstuffs inside your wine cabinet.
- The wine cabinet is not designed for use in a garage, outside, or in the open air.
- The following (approximate) temperatures are recommended for wine drinking:
o Great Bordeaux wines – Red 16 – 17°C
o Great Burgundy wines – Red 15 – 16°C
o Great vintages dry white wines 14 – 16°C
o Red wines, fruity wines, young wines 11 – 12°C
o Rosé wines from Provence, early-to-market wines 10 – 12°C
o Dry white wines and local red wines 10 – 12°C
o Local white wines 8 – 10°C
o Champagnes 7 – 8°C
o Liqueur wines 6°C
- Temperature stability is of the greatest importance when storing wine.
- Exposure to light, vibrations, temperature variations or humidity can spoil the wine.
To Next Page
Loading...
