Lea Connect Series - Introduction; Main Features

© 2019 LEA Professional. All Rights Reserved.
4
Cloud control, monitoring, and notifications coming end of 2019
INTRODUCTION | CONNECTSERIES
Introducing an Internet of Things (IOT) enabled, professional-grade amplifier family – the Network
Connect Series. Perfectly suited for small to medium scale installations, these two, four, and eight
channel amps feature direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect,
you can engage the built in WiFi access point, connect to the venue’s WiFi, and use the FAST 10/100MB
Ethernet to connect to any local area network via Cat5 or Cat6 cable.
Then there’s the Cloud…The Network Connect Series is the first professional amplifier family to feature
Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications and more
from any of your personal devices – no software download needed! Just connect your amp to a network
and start commanding your systems. Register for your free LEA Cloud account at leaprofessional.cloud
The power of the Cloud and our Web UI will set the installer up to be able to create a recurring revenue
source by adding monitoring and preventative system maintenance to their service contracts. Also
included is an Analog Devices 96kHZ DSP with up to 48dB/Oct filters, 8 parametric EQ’s, speaker
protection limiting, and many more features controlled by a web-based UI.
The Network Connect Series also features analog inputs and external I/O control for remote on/off and
fault monitoring.
MAIN FEATURES
Web Browser-based UI works on any device with no software to download
Direct LoZ and HiZ (70V or 100V) selectable per channel
Proprietary Smart Power Bridge double the output power of any single channel without sacrificing
other channels on the amplifier
3 Ways to Connect to the amplifier 1.) Built in WiFi Access Point 2.) Connects to existing WiFi
network 3.) Local Area Network Ethernet connection
3
rd
Party API support for most of the industry leading system processors on the market
96kHz Analog Devices DSP with Input Routing, multiple 48dB/Oct crossover filters, 8 Parametric EQ
filters, user configurable speaker limiters, and real time load monitoring
Universal Switch Mode Power Supply with PFC. Operation from 100VAC – 240VAC +/-10%
Analog fully routable inputs with backup capabilities
External I/O Port for Remote On/Off and fault monitoring
Highly Efficient Class D Output Stage for low AC Current draw