LEAB CDR 200/40 - General Safety

Installation Instructions General Safety
Page 2 of 6
In this manual you will find the following symbols:
Shows you useful tips and information about the device.
Indicates a mandatory requirement for the following
instruction.
Shows the result of an instruction.
2 General Safety
This manual supports safe handling of the device. Use the device solely in
accordance with its intended use:
The LEAB CDR enables virtually loss-free charging of two batteries from one
source, such as an alternator or charger. The CDR is installed between the
starter and auxiliary batteries and serves as a current distributor. The LEAB
CDR is bidirectional, charging takes place in both directions.
Any modifications to the device or its components are prohibited and do not
conform to its intended use.
Observe the following safety instructions:
 Danger from damaged, frozen or deformed batteries: Before charging,
make sure that the battery is undamaged and the electrolyte is not
frozen.
 Only charge batteries in well-ventilated rooms and away from ignition
sources.
 When handling batteries, wear acid-proof clothing.