4. START THE GENERATING SET
WARNING
Do not hook up tools or other apparatus to the generating set before starting.
4-1 Recoil starting
Start the engine according to the following
procedures:
1. Open the fule cock.
2. Set the engine speed lever at the RUN
position.
3. Pull out the recoil starter handle.
Pull out the handle until you feel the
resistance, then return it back to the ini-
tial position.
Press down the decompression lever. It
will return automaticallly when the recoil
starter is pulled.
Pull out the recoil starter handle briskly
with both hands.
To Next Page
Loading...
Need help?
General
