LEAF LEARN microgreens mini - Mini Growbox Green LED Indicators

What does the side diode flashing on the Mini indicate?
It
flashes red
(
twice per
second)
The
Mini growbox connects to the set Wi-Fi network
(
according to the entered SSID and password). It usually
flashes
once or several times; however, if the signal is worse
and
the login takes longer. Moreover, the LED lights are off,
and
the Mini growbox cannot analyse the growth.
If
the red diode flashes continuously, you had probably
entered
the Wi-Fi network password and/or SSID incorrectly
the
first time you activated the Mini. Suppose the growbox
has
already
been activated and worked correctly. In that case, the
flashing
means that your Mini cannot pick up the Wi-Fi signal,
or
that your Wi-Fi network is not active. In that case,
temporarily
move the Mini growbox closer to your router, or
restart
the router. You can also disconnect and re-connect the
Mini to
the network – it can also solve the problem.
It
flashes red
once
every 10
seconds
Idle
state, the device has no connectivity and is not taking
pictures
. LED lighting is off. Move the Mini growbox
temporarily
closer to your router, or restart the router. You
can
also
disconnect and re-connect the Mini to the network – it
can
also solve the problem.
Green
flashes
seven
times,
then
red lights
up
for a long
time
The
camera is taking pictures, the LED is on, the
image has not
been
sent, and/or the server returned it as an error. The
plants
are
photographed once an hour; thus, you can observe the
flashing
when sending the photo for about an hour.
Suppose
the Mini growbox is not registered and you are just
activating
it. In that case, the registration QR code will be
photographed
every 10 seconds (up to 600 times in a row).
The
error is usually caused when the QR code cannot be
recognised
during registration (there can be reflections on the
mobile
phone glass and non-recognition of the code). Try to
place
the mobile phone under the camera differently.
If
the Mini growbox is registered, this error can occur if there
is
no connectivity (Wi-Fi network does not work). Move the
Mini
growbox temporarily closer to your router, or restart the
router
. You can also disconnect and re-connect the Mini to the
network
for five seconds – it can also solve the problem. By
the
way, in case of this error, try to send pictures of the plants
and
repeat the action in five minutes, altogether, three times.
If
it fails for the third time, the next photo shall be taken after
an
hour.