Launch the Mini growbox
Assemble the Mini Growbox
1. Take all parts of the Mini growbox out of the box.
Then insert the metal arm into the plastic base.
Place the arm legs above the circular holes - the leg
with the white cable belongs to the round aperture
between positions 3 and 4. Pass the cable through
the base.
2. Lightly slide both arms into the apertures in the
base - there should be a gentle click.
3. Place the cable into the cable clamps in the base
and pass it out through the aperture.
4. Place the Mini growbox in a suitable place, carefully
remove the rubber cap on the camera and plug the
growbox into the electric socket. After plugging in,
the light on the side of the arm should flash quickly
red and green and then slowly red and green. Now,
the Mini growbox awaits your entering the Wi-Fi
network.
TIP: Do you want to move the Mini growbox?
If you want to move the already connected growbox to
another place, unplug it and carefully move it where you need
it. However, be careful – never carry it by the arm, always use
the base. Suppose you inadvertently grab the Mini by the arm.
In that case, you can damage the camera, or the weight of the
watered capsules may rip it from the base and, thus, destroy
the entire device.
B
5
To Next Page
Loading...