Launch the Mini growbox
Connect your Mini to Wi-Fi
1. Find the network called LLconfigxxxxxx (xxx means
letters and numbers) in the Wi-Fi configurator on
your mobile phone - this is a hotspot created by your
Mini growbox. Click to connect your mobile to it. If
the network requires a password, enter “LLconfig”
(without the quotation marks) but use the upper
and lower cases.
2. In your mobile phone, fill in the form: SSID is the
name of your home Wi-Fi network, the password is
the password you use when connecting to the home
Wi-Fi. At the bottom of the form, please, fill in the
time zone and the times when the Mini growbox
should be lit. We recommend adapting the lighting
to your daily rhythm. The light should be on, if
possible, 14 hours a day. Should the form not appear
on your mobile phone, enter 10.10.10.10 into the
web browser. However, you must be connected to
the Mini hotspot.
3. Once the Wi-Fi is set up correctly, the Mini growbox
shall restart itself (it will flash red/green quickly).
However, the LED light will still not be lit, because
the Mini awaits its pairing with the mobile
application by scanning the QR from the screen of
your mobile phone (see section Connect the Mini
growbox to the LeafLearn application). While
waiting for the QR code to be scanned by the mobile
phone, the Mini status diode flashes on the
application screen, always 7times green and once
red.
6
To Next Page
Loading...