EasyManua.ls Logo

LEAF LEARN microgreens mini - Insert First Microgreen Capsule

Default Icon
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Start you first capsule
Insert the first capsule into the Mini
1. Open the capsule with microgreens. Peel off the cap
so that the entire capsule can be easily watered;
however, do not tear off the cap entirely, you will
still need the cap in a while.
2. Slowly pour approximately 200 ml of water into the
capsule, up to the lower edge thereof. Wait till the
water table drops close to the cotton wool. The
seeds must not be immersed in water completely;
thus, drain any excess water as soon as possible (so
that the fixing film does not dissolve). Then seal the
capsule again carefully.
3. Insert the closed capsule into the Mini growbox. If
you just started to use the growbox, the capsule
shall automatically appear in the LeafLearn app
within five minutes. For all other capsules, it will
take about an hour.
4. In 48 hours, the LeafLearn app will let you know that
you can tear off the cap. Do it as soon as possible;
otherwise, the growing microgreens will start lifting
it.
5. Now, all you have to do is watch your microgreens
grow. When the time is right, you will receive a
notification. Enjoy your meal!
D
8