Add your Mini growbox to the app
1. You can register your Mini growbox in the
LeafLearn app. In the application, press the
“Register your Mini” button, name your device, and
press the “Add” button.
2. A QR code shall appear on the application screen.
Place your mobile phone with the visible QR code
in the middle of your Mini growbox base, between
the compartments for capsules. Do not switch off
the mobile phone and make sure that its display
does not turn off.
3. Within five minutes, the application shall
automatically pair with the growbox. You shall
recognise it because the entire device lights up,
and its side status diode is solid green and flashes
every minute. After about an hour, the Mini shall
switch to standard mode and flashes green
approximately every 10 seconds.
4. Is the growbox flashing green? It’s done! From now
on, you’ll find your Mini right in the LeafLearn app.
Should the growbox flash red, it has probably lost
the Wi-Fi signal and, therefore, cannot analyse the
plant growth. Even so, it will keep its light on; so
that your plants can continue to grow.
7
Link your Mini to the app
C
To Next Page
Loading...