4
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned Off.
2. Locate the battery cover on the bottom of the unit and use
a screwdriver to loosen the screw and open the battery cover.
3. Remove old batteries by pulling up on one end of each
battery.
4. Install 2 new AA (AM-3/LR6) batteries following the diagram
inside the battery box.
5. Replace the battery cover and tighten the screw to secure.
610203 manual.indd 4 01/17/2020 14:21:31
To Next Page
Loading...
