12
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose
the unit to moisture or water.
5. Try to change the batteries for new ones if the toy is not
working properly.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions,
please follow these steps:
1.
Turn the unit
OffOff
.
2.
Interrupt the power supply by removing the batteries.
3.
Let the unit stand for a few minutes, then replace the batteries.
4.
Turn the unit back
OnOn
. The unit should now be ready to play again.
5.
If the unit still does not work, replace with an entire set of
new batteries.
Environmental phenomena
The unit may malfunction if subjected to radio-frequency interference. It should revert
to normal operation when the interference stops. If not, it may become necessary to
turn the power OFFOFF and back ONON, or remove and reinstall the batteries. In the unlikely
event of an electrostatic discharge, the unit may malfunction and lose memory,
requiring the user to reset the device by removing and reinstalling the batteries.
To Next Page
Loading...
Need help?
General