Specifications are subject to change without notice.
© 2023 LeapFrog Enterprises, Inc.
a subsidiary of VTech Holdings Limited.
All rights reserved. 01/23. LF815HD_UK_QSG_V4.
Technology Wi-Fi 2.4GHz 802.11 b/g/n
Channels 1 - 13 (2412 - 2472 MHz)
Internet Connection
Minimum Requirement: 1.5 Mbps @ 720p or 2.5 Mbps @ 1080p
upload bandwidth per Baby Unit
LCD 5” Colour LCD (IPS 1280x720 pixels)
Power requirements
Parent Viewer: 3.7V 5000mAh Lithium-ion battery
Baby Unit power adaptor: Output: 5V DC @ 1A
Parent Viewer power adaptor: Output: 5V DC @ 2A
Maximum power
used by the
transmitter
0.1W (100 mW)
Credits:
The Background Noise sound file
was created by Caroline Ford,
and is used under the Creative
Commons license.
The Stream Noise sound file
was created by Caroline Ford,
and is used under the Creative
Commons license.
The Crickets At Night sound file
was created by Mike Koenig,
and is used under the Creative
Commons license.
The Heart Beat sound file was
created by Zarabadeu, and
is used under the Creative
Commons license.
Find the answer to your questions. Get assisted at your
own pace using our knowledge-rich full Online Manual, or
contact Customer Support with your inquiries.
Scan the QR code to access the Online Support
Page or visit leapfrog.com/en-gb/support.
Customer Support
Technical Specifications
Declaration of Conformity
This product is intended for use within Europe and UK.
This equipment complies with the essential requirements to EU’s Radio Equipment Directive (2014/53/EU) and the UK’s Radio
Regulations 2017 on radio systems and telecommunication equipment.
LeapFrog Enterprises, Inc., a subsidiary of VTech Holdings Limited hereby declares that LF815HD is in compliance with the
essential requirements and other relevant provisions of EU’s Radio Equipment Directive (2014/53/EU) and UK’s Radio
Equipment Regulations 2017.
The Declaration of Conformity for the LF815HD is available from leapfrog.com/en-gb/legal/eudoc.
To Previous Page
Loading...
