Notes:
• Before using the baby monitor for the first time, charge the Parent Viewer battery for 12
hours. When the Parent Viewer battery is fully charged, the battery icon becomes solid
.
• The standby time varies depending on your actual usage time and the age of the battery.
Battery Indicators Battery Status Action
alert displays on the Parent
Viewer screen, and the battery
icon displays empty , with
the LED light flashes.
The battery is low in power
and may only be used for a
short time.
Charge without
interruption (about 30
minutes).
The battery icon becomes solid
.
The battery is fully
charged.
To keep the battery
charged, connect it to AC
power when in use.
1. Slide the On/Off switch to ON
to power on your Baby Unit.
2. Press and hold until the welcome screen
appears. The green LINK LED light
flashes.
Note:
• POWER LED Light
is OFF by default.
2. Charge the Parent Viewer Battery
3. Power On or Off the Baby Monitor
The battery icon on the screen indicates the battery status:
Press and hold
To Next Page
Loading...
