EasyManua.ls Logo

LeapFrog On-the-Go Story Pal - Product Features - Advanced; Star Button, Volume, Timer, and USB Port

LeapFrog On-the-Go Story Pal
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
5. Star Button
In the Recorded Story mode, follow the
audio instructions and press the Star
Button to begin recording.
In other modes, quickly press the Star
Button to hear your playlist. To save a
story/song to the playlist, press and hold
the Star Button until it beeps.
6. Volume Control
Turn the dial up or down to adjust the
volume level.
7. USB Port
To download additional free stories,
follow the instructions in the
Downloadable Content section later in
this guide.
8. Set Timer
Press and hold the Play/Pause Button for 5 seconds, then
follow the audio instructions to set the timer.
9. Automatic Shut-Off
To preserve battery life, the On-the-Go Story Pal™ will
automatically shut off after approximately 60 seconds if a
story or song is not playing. The unit can be turned on by
pressing any button.

Other manuals for LeapFrog On-the-Go Story Pal

Related product manuals