13
GB/IE
Switching the Door Mounting Side
To switch the door mounting side :
● Turn off the main switch (Photo 4(1)).
Unplug the mains cord.
Take out all the food from the appliance.
● Remove the adjustment feet.
● Unscrew the lower hinge (Phot. 7) and
the element fastening the foot (Phot. 8)
● Take out the refrigerator chamber
door.
● Unscrew the upper hinge bolt and dri-
ve it in the second hinge in the extreme
opening (Phot. 9).
● Mount the refrigerator door by inserting
the upper hinge bolt into the door bush
and close the door.
● Tilt the appliance back, the magnetic
gasket will hold the door.
● Unscrew the lower hinge bolt, drive
it into the second opening of the hinge
(Phot. 7(1)).
●Tighten the element fastening the foot
screw with three screws, replacing the
left hinge.
● Drive the adjustable feet in.
●Tighten the handles opposite to the
hinges.
●Turn on the refrigerator.
(1)
7
9
8