p.9 MyWay User Manual
8.2 Frame | Folding the Frame
• Stand behind the rear legs
of the frame.
• Brake both rear castors-
see section 8.6
‘Applying/releasing
brakes’ for instructions.
• Pull both triggers.
• Walk the frame backwards,
towards you (in direction of the
arrow), until the front legs have
folded down on top of the rear
legs. Release both triggers.
Warning – ngers should
be placed on triggers as
shown, to avoid potential
for nger nipping.
Warning – to check if frame legs are fully locked out, lift the frame in an upwards
direction - if the legs do not sway/drop etc., the frame and legs are in the correct
position. If the legs do sway/drop you must reposition the legs.
Warning – never fold the frame without
removing the upper support unit rst.
Please note, this is applicable to sizes 2
and 3 only as the upper support unit
does not detach from size 1.
To Next Page
Loading...
