9.15 Product conversion –
prone to supine
To convert the Squiggles Prone Stander
to accommodate supine standing, simply
attach the head support as outlined under
“Attaching the Headrest” and attach the tray
with the cutout facing the child. Loosen the
sandals and turn through 180 degrees and
you are ready for supine standing.
9.16 Adjusting the height
of the tray in prone and
supine
The height adjustment knobs for the tray
are located on either side of the central
spine. Rotate knob (A) in a clockwise
direction and rotate knob (B) in an
anti-clockwise direction as shown,
select the required height and retighten.
A
B
To Next Page
Loading...
