C
C
D
D
9.17 Adjusting the depth
and angle of the tray
Loosen the adjustment knob (C) on either
side, slide the tubes along the receiving
brackets to achieve the desired depth and
retighten the knobs. To adjust the angle of
the tray loosen the knobs (D) on either side
of the tray, set the tray to the required angle
and retighten securely.
Never use the tray to steer or push
the chair.
Do not place hot objects on the tray,
greater than 40 degrees Celsius.
Please note that the tray is for the use
of the user only. Do not lean or place
heavy objects on the tray greater
than 8kgs (17.6lbs).
To Next Page
Loading...
