Leckey Squiggles+ - Sandal Positioning and Securing; Footplate Angle Adjustment

p.20 Squiggles
+
Stander User Manual
9.12 Sandals positioning
To position the sandals
simply loosen the knob
under the footplate, select
the position you require
and re-fasten the knob.
To position the user’s feet
in the sandals secure the
Velcro straps provided so
the foot is held in place.
The straps should be
placed over the bridge of
the foot and over the toes.
The front strap can be fed
through one of two slots on
either side of the sandals,
depending on the size of
the user’s feet.
9.13 Footplate angle
adjustment
To set the angle
to accommodate
plantarexion and
dorsiexion, simply loosen
or tighten the knob
to set the desired angle.
If the child is wearing
sandals or light footwear
check the straps to make
sure the webbing does
not irritate the skin.