Lectron V2L - User Manual

USER MANUAL
V2L Adapter

Summary

About the V2 L Adapter

Warnings

Important safety warnings for the V2L adapter, specifically regarding use in wet conditions.

Whats Included

Introduction to Parts

How to Use

Troubleshooting

Specifications

Get More Support

Overview

1. Important Warnings
2. What's Included
3. Introduction to Parts
4. Compatibility
5. How to Use
6. Troubleshooting
7. Technical Specifications
8. Maintenance Features

The Lectron V2L (Vehicle-To-Load) Adapter is a device designed to convert an electric vehicle's (EV) charger port into a standard AC outlet (US), enabling users to power electronic devices, lights, and appliances directly from their EV. This functionality allows the EV to act as a mobile power source, offering versatility for various applications, from outdoor activities to emergency power needs.

Important Warnings:

A critical safety warning associated with the V2L Adapter is to avoid using it in wet conditions, such as rain or snow. This precaution is essential to prevent electrical hazards and ensure the safe operation of the device and connected appliances.

What's Included:

The package contains one V2L adapter.

Introduction to Parts:

The V2L Adapter consists of two primary components:

1. Standard AC outlet (US): This is the port where users plug in their electronic devices or appliances.
2. J1772 plug: This end of the adapter is designed to connect to the EV's J1772 charger port.

Compatibility:

The Lectron V2L Adapter is specifically compatible with the Hyundai Ioniq 5 (2022 and 2023) models. Users should verify their vehicle's compatibility before attempting to use the adapter.

How to Use:

The usage process involves a few straightforward steps:

1. Plugging in the adapter: Firmly plug the J1772 end of the adapter into the EV's J1772 charger port. It is crucial to note that the adapter must be plugged in within 1 minute of opening the charger door. Once plugged in, the adapter will automatically lock to prevent theft, ensuring a secure connection.
2. Connecting devices: Open the hatch at the back of the adapter to reveal the standard AC outlet. Plug the electric cord of the desired electronic device or appliance into this AC outlet.
3. Unplugging devices: When finished using the adapter, first unplug the electric cord from the adapter's AC outlet.
4. Removing the adapter: To unlock and remove the adapter from the EV, press the 'unlock' button on the vehicle door. Subsequently, press the button located on the top of the adapter itself and then pull it out from the charger port.

Troubleshooting:

The manual addresses two common troubleshooting scenarios:

1. Device not powering on: If the adapter is not powering a connected device, users should ensure that both the adapter and the electric cord are firmly plugged in. A loose connection can prevent power delivery.
2. Adapter suddenly stopping during use: If the adapter unexpectedly stops functioning, the issue could be due to an overload or a low EV battery. Users are advised to check their EV's battery level and ensure that the total power draw of connected devices does not exceed the adapter's capacity.

Technical Specifications:

The Lectron V2L Adapter boasts the following technical specifications:

• Compatibility: J1772
• Outlet: NEMA 5-15 (AC)
• Current: 15A Max
• Contact resistance: 0.5 mΩ Max
• Weight: 10.6 oz
• Dimensions: 8.1 x 2.9 x 2.1 in

These specifications indicate that the adapter is designed to handle standard household appliances and electronics within its current and voltage limits. The NEMA 5-15 outlet is a common type found in North America, making it compatible with a wide range of devices. Its compact dimensions and light weight make it portable and easy to handle.

Maintenance Features:

The manual does not explicitly detail specific maintenance features or routines for the Lectron V2L Adapter. However, based on the warnings and general best practices for electronic devices, it can be inferred that keeping the adapter dry and ensuring proper connections are key aspects of its maintenance. Avoiding use in wet conditions is a primary directive, suggesting that moisture protection is crucial for the device's longevity and safe operation. Regular inspection for any physical damage or wear on the plugs and outlets would also be a reasonable maintenance practice to ensure continued reliable performance. As with most electronic accessories, storing it in a clean, dry place when not in use would contribute to its overall lifespan.

Lectron V2L Specifications