UCR411A
LECTROSONICS, INC.
22
32251
Velcro mounting strips
CCMINI
Zippered, padded vinyl system pouch
CH12
AC power supply with US type 2-pin plug on hous-
ing, 110 VAC input; 12 VDC, 400 mA output.
VSR1
Thin velcro loop for power cable strain relief.
A8U
UHF marine phosphor bronze antenna - straight
connector, specify block.
PS70
A/C power supply with 3-pin NEMA socket on hous-
ing, 100-240 VAC input; 13.8 VDC, 2.8 A (max.)
output.
UMCWB
Rack-mount multicoupler combining antenna and
power distribution for up to four Lectrosonics wire-
less microphone receivers.
SNA600
Collapsible dipole antenna adjustable from 550
MHz to 800 MHz. Ideal for situations where a full
360 degree receiving pattern is required as op-
posed to a directional pattern.
ALP Series (ALP500, ALP620, ALP650)
“Shark fin” Log Periodic Dipole Array (LPDA)
antennas provide useful directional pattern over
500 to 800 MHz range. Ideal for portable applica-
tions including temporary setups for field production
ARG15-ARG100
Coaxial cables for remote antennas are available
from Lectrosonics in a variety of lengths - from 2 to
100 ft. Cables include Velcro tie wraps.
21425
6 ft. long power cord; coaxial to stripped & tinned
leads. Coaxial plug: ID-.080”; OD-.218”; Depth- .5”.
Fits all compact receiver models that use CH12
power supply.
21472
6 ft. long power cord; coaxial to stripped & tinned
leads. Right angle coaxial plug: ID-.075”; OD-.218”;
Depth- .375”. Fits all compact receiver models that
use CH12 power supply.
Replacement Parts and Accessories
VSR1
CH12
PS70
A500RA
.475”
.375” O.D.
.375”
.35”
.375” O.D.
21425
21472
To Next Page
Loading...
