Need help?Do you have a question about the Lectrotab ALC-1 and is the answer not in the manual?
General| Number of Zones | 1 |
|---|---|
| Material | Plastic |
| Protection class | IP65 |
| Control Type | Automatic |
| Compatibility | Lectrotab trim tab systems |
Failure to follow instructions may result in equipment failure or serious injury.
Details on mounting the ALC display panel on a flat, perpendicular surface for optimal sensor function.
Illustrates correct and incorrect mounting positions for the ALC display panel.
Instructions for wiring the ALC display panel, including wire gauge and power source.
Steps to calibrate the ALC display by running trim tabs to full positions to store settings.
Procedure to verify correct wiring and tab movement after calibration by testing buttons.
Guide to setting the desired boat attitude in automatic mode and adjusting it.
Explains how to adjust the gain for faster response time in correcting boat list conditions.
Identifies flashing LED indicators that signify specific faults or error conditions.
Troubleshooting steps for when the ALC display LEDs are not illuminating.
Instructions for connecting the ALC-1 to Bennett trim tab systems.
Instructions for connecting the ALC-1 to Lenco trim tab systems.
To Next Page
