To Next PageTo Next Page
Need help?Do you have a question about the Leer CAB HIGH BED CAP and is the answer not in the manual?
List of included components and items to verify during installation.
List of tools required for the installation of the truck cap.
Clean bedrails, tailgate, and cap window with isopropyl alcohol.
Carefully place the cap onto the truck bed, aligning openings.
Verify tailgate and cap door fit, handle operation, and seals.
Install clamp bolts, align clamps, and tighten nuts to specified torque.
Check and re-torque clamps periodically due to normal use.
Steps for connecting the fuse box harness to the vehicle's wiring.
Instructions for routing the CHMSL connection harness to the engine compartment.
Prepare the aftermarket CHMSL circuit wire for connection.
Connect the CHMSL filter harness to the vehicle's CHMSL circuit.
Route the battery wire harness from the rear to the engine compartment.
Verify functionality of all lights and CHMSL after wiring.
Check mounting clamps, door operation, and all lighting systems.
Specific part numbers and descriptions for the 5'5" cap.
Specific part numbers and descriptions for the 6'5" cap.
Explains warranty duration and conditions for USA and Outside USA.
Lists items not covered by warranty and contact information.
Guidance on regular cleaning, lubrication, and checks for the truck cap.
Crucial safety advice for operating the vehicle with the truck cap installed.
General| Brand | Leer |
|---|---|
| Model | CAB HIGH BED CAP |
| Category | Automobile Accessories |
| Language | English |
