Leer SR 250 User Manual

1
FOR YOUR RECORDS
DATE PURCHASED:___________________________________
SERIAL NUMBER:_____________________________________
LEER RETAILER:______________________________________
WITH LEER’S EXCLUSIVE
INSTALLATION INSTRUCTIONS &
OWNER’S MANUAL
Thank you for purchasing the LEER
R
SR 250 soft rolling tonneau cover. At LEER, we looked at ways to
make it better, front to back and inside out. We engineered components with new innovations at every
point including our CYNC™ latching system (patented). The result is a soft rolling cover that’s unlike any
cover on the road today.
NOTICE TO INSTALLER: It is recommended you take time to read these instructions before installing the
cover even if already familiar with the product. Improvements are often made without prior notice. Al-
ways handle the cover and components with care to avoid damage. If you find a part missing or defective,
or if you have trouble installing this product, please have the model number ready (located on a tag under
the first panel) and call your dealer. When done, these instructions and warranty information must be giv-
en to the customer to keep.
NOTICE TO CUSTOMER: Before using this product, read the operating instructions, maintenance and
safety sections of this owner’s manual and save for future reference. Your new LEER tonneau must be
registered to make the warranty valid. Registration information can be found on the back page.
Patented and Patent Pending see LEER.com

Leer SR 250 Specifications

General

Brand	Leer
Model	SR 250
Category	Automobile Accessories
Language	English

Summary

Installation Steps

Pre-Preparation

Prepare the truck bed by cleaning and installing the bulkhead seal on the truck.

Installing Rail System

Attach the left and right hand rails to the truck bed's channel rails, ensuring proper alignment.

Installing Clamps

Securely fasten the clamp assemblies to the truck bed channel rails using the provided Allen wrench.

Installing the Cover

Mount the tonneau cover assembly onto the installed rails and secure it using bolts and barrel nuts.

Adjusting for Tautness

Fine-tune the cover tension by moving the cover over teeth towards the front or rear of the bed.

Replacement Parts

Replacement Parts Order Form

Form to order replacement parts for the SR250 tonneau cover, listing part numbers and descriptions.

Parts Identification and Kits

Diagrams identifying clamp kits, latch kits, lock kits, and rail seal kits with corresponding part numbers.

Warranty and Maintenance

Limited Lifetime Warranty Policy

Details the warranty coverage, period, limitations, and exclusions for the tonneau cover.

Safety and Care Tips

Provides guidance on maintaining the cover, periodic checks, cleaning, and safe operation.

Warranty Registration

Instructions on how to register the product online to ensure warranty validity and provide feedback.