Leer SR 250 - Table of Contents; Master Carton Components; Hardware Box Contents

2
TABLE OF CONTENTS
Master Carton Components ...................................................................... 2
Hardware Box Contents .............................................................................. 2
Pre-Preparaon .......................................................................................... 3
Installing Rail System .................................................................................. 3
Installing Clamps ........................................................................................ 3
Installing Cover ........................................................................................... 4-5
Adjusng for Tautness (If Needed) ............................................................. 5
Replacement Parts ..................................................................................... 6-7
Warranty Policy…... .................................................................................... 8
MASTER CARTON COMPONENTS
- 1 SOFT COVER ASSEMBLY
- 1 HARDWARE PACKAGE (See Details Below)
- 1 EACH LEFT HAND RAIL
- 1 EACH RIGHT HAND RAIL
- 1 EACH BULKHEAD SEAL
Unpack components and inspect for missing or damaged components.
Open the truck’s tailgate and clean truck bed if dirty.
HARDWARE BOX CONTENTS
- 6 EACH CLAMP ASSEMBLY (STYLE VARIES PER CLAMP KIT)
- 2 EACH FRONT CROSSBAR HOLD DOWN
- 1 EACH 2.5MM ALLEN WRENCH
- 1 EACH 5MM ALLEN WRENCH
- 1 EACH 6MM ALLEN WRENCH
TOOLS
INCLUDED
Patented and Patent Pending see LEER.com