Leer SR 250 - Adjusting for Tautness

5
INSTALLATION INSTRUCTIONS
4
INSTALLING THE COVER
FOLD DOWN THE COVER AS
SHOWN FOR CYNC LATCH
ENGAGMENT.
REMOVE CLIPS AND ROLL
DOWN COVER AS SHOWN.
5
ADJUSTING FOR TAUTNESS OF COVER (IF NEEDED)
TIGHTEN COVER
(MOVE OVER TEETH
TOWARD FRONT OF BED)
LOOSEN COVER
(MOVE OVER TEETH
TOWARD REAR TAIL GATE)
Patented and Patent Pending see LEER.com