6. Operation and Maintenance
5. Environment
The camera should be kept in a cool, dry place away from direct
sunlight, flammable materials, explosive substances, etc.
This product should be transported, stored, and used only in the
specified environments as stated above.
Do not aim the camera at a strong light source, as it may cause
overexposure of the picture, and may affect the longevity of the
cameras sensors. Ensure that the camera is in a well ventilated
area to prevent overheating.
Do not touch the camera sensor or lens directly.
To clean dust or dirt off of the lens, use an air blower or a
microfiber cloth.
Be sure to use only the accessories recommended by
manufacturer.
Before installation, please open the package and check to
ensure that all of the components are present.
7. Accessories
Contact the seller that you purchased from if anything is broken
or missing in the package.
3
To Next Page
Loading...
