What to do if my Legacy Heating WELLFP-RA burner won’t light?
If the burner on your Legacy Heating Outdoor Fireplace won’t light, here are a few things to check: * Make sure your propane cylinder isn't empty and replace it if it is. * Check for any blockages in the orifice and clear them. * Ensure the control knob is in the ON position.
Why is the burner flame low on my Legacy Heating WELLFP-RA Outdoor Fireplace?
A low burner flame on your Legacy Heating Outdoor Fireplace could be due to several reasons: * Low gas pressure: Turn the cylinder valve OFF and refill the cylinder. * Cold weather: If the outdoor temperature is below 40°F and the tank is less than ¼ full, use a full cylinder. * Blockage: Check the burner and orifices for any blockages.
How to fix thick black smoke coming from my Legacy Heating Outdoor Fireplace?
If you're seeing thick black smoke from your Legacy Heating Outdoor Fireplace, it's likely due to a blockage in the burner. Remove the blockage and clean the burner inside and out.
What causes carbon build-up on a Legacy Heating WELLFP-RA Outdoor Fireplace?
Carbon build-up on your Legacy Heating Outdoor Fireplace is often caused by dirt or film on the burner. Cleaning the burner should resolve this issue.
Details risks and precautions related to carbon monoxide production.
Information on preventing fire and explosion due to improper use or placement.
Covers outdoor use, gas pressure, and other general safety advisories.
Step-by-step guide for performing a leak test on gas connections before operation.
General| Brand | Legacy Heating |
|---|---|
| Model | WELLFP-RA |
| Category | Outdoor Fireplace |
| Language | English |
To Next Page
