Legacy Heating WELLFP5010 - Assembly Instructions; Step 1: Door Assembly; Step 2: Leg Attachment

Assembly
Page 8 of 20
Step 1:
Attach
Note： Do not tighten all screws as you will need adjust the holes to ensure proper alignment.
door (12) to leg (10) using M6X25 (b) - 2PC
Remove the screws and washer from the door handle ( c ). Attach the door handle ( c ) to
door ( 12 ), then tighten the handle.
Step 2:
R
Be mindful of the direction of the door (12).
emove control knob (6), attach legs leg (9), leg (10) and (13) with M6X12 (a) - 8 pcs.
9
9
10
10
12
13
door handle