Legamaster EVOLVE ETX-6530 - Settings Menu

Product Content & Operation - Version 1.0 17
OPERATING THE SCREEN
MAIN SETTINGS
LEVEL1
LEVEL 2
VALUES
EXPLANATION
NETWORK & CONNECTED DEVICES
Ethernet
MAC
address
shows the MAC address for the wired connection
IP address
shows the IP address for the wired connection
Ethernet
ON/OFF
Toggle ethernet-connection on / off for the screen itself. Disabling this
does not disable ethernet for the OPS
Wi-Fi
MAC
address
shows the MAC address for the Wi-Fi connection
IP address
shows the IP address for the Wi-Fi connection
Wi-Fi
ON/OFF
Toggle Wi-Fi on and off
Hotspot
Hotspot
ON/OFF
Toggle the hotspot-functionality on / off
Setup Wi-Fi
hotspot
Set-up the hotspot
Bluetooth
MAC
address
show the MAC address for the bluetooth adapter
Bluetooth
ON/OFF
Toggle bluetooth on/ off, show / connect with available devices
DEVICE
Picture
Picture
mode
Standard
Select pre-set picture modes
Dynamic
Soft
User
Picture mode where settings can be adjusted manually in 'Advanced'
Power
mode
User
Choose a power-mode: User = manual brightness setting, Auto =
Automatic brightness setting based on ambient light conditions,
balanced = brightness 75, ECO = brightness 50, DCR = 100. Power
consumption varies based on these settings.
Auto
Balanced
ECO Friendly
DCR
Color
tempreture
Standard
Select a color temperature mode
Cool
Warm
Eye protect
ON/OFF
Toggle Eye Protect mode on / off. When enabled, the brightness will
be reduced when writing.
Anti blue
light
ON/OFF
Toggle Anti blue light on / off. When enabled the amount of blue light
will be reduced.
Backlight
0-100
Manually adjust the brightness. Using this setting will change the
power mode setting to 'Manual'
Advanced
Contrast
0-100
In Picture mode 'User', use these settings to manually adjust the
picture settings
Brightness
0-100
Saturation
0-100
Sharpness
0-100
PC mode
PC / Video
Allows switching to Video mode, in which 'Overscan' can be used
Display
mode
16:9/P2P
Toggle picture aspect mode
MEMC
Off/Low/Middle/High
Change the MEMC level
Overscan
ON/OFF
toggle between overscan on and off.
HDR
ON/OFF
toggle between HDR on and off.
VGA auto
adjust
toggle VGA auto adjust o / off when receiving a VGA signal
3.3 SETTINGS MENU