What to do if Legend Brands DRI-EAZ CMC200 Dehumidifier does not operate?
If your Legend Brands Dehumidifier isn't turning on, ensure the unit is switched on and properly plugged into a working wall outlet. Also, check the power cord connection.
Why does water drip out when moving Legend Brands Dehumidifier?
To prevent water from dripping when moving your Legend Brands Dehumidifier, make sure to purge the unit completely before unplugging it. Refer to the section 'AT THE END OF THE JOB . 16' for instructions on how to do this properly.
The Dri-Eaz® CMC 200 Dehumidifier reduces humidity in enclosed environments. It is ideal for crawlspace drying and humidity control.
Provides critical safety instructions, including warnings on electrical shock, explosion hazards, and proper handling.
Guides users on product registration for support and details on obtaining service, including RMA.
Details unit setup, positioning, drain hose connection, electrical plug-in, and startup display modes.
Explains the i-Series Command Hub features for dehumidifier controls, real-time data, and job monitoring.
Describes how the unit displays errors and warnings, and how to view and clear messages.
Provides steps to ensure all water is removed from the unit before moving, including purging and draining.
Outlines critical notices for safely moving, transporting, and storing the dehumidifier unit.
Details recommended maintenance tasks, including cleaning schedules, procedures, and necessary tools.
Lists common faults, their causes, and solutions for operational issues with the unit.
Provides technical specifications for the CMC200 dehumidifier, including dimensions, power, and performance metrics.
Lists the parts included with the unit, such as drain hose and filter, and optional accessories.
Directs users to LegendBrands.com for more product information and proper disposal guidelines.
Details required safety procedures and considerations for servicing dehumidifiers with R32 refrigerant.
General| Model | CMC200 |
|---|---|
| Type | Refrigerant |
| Power Supply | 115V |
| Water Removal Capacity (Saturation) | 200 pints/day |
| Operating Temperature Range | 33–100 °F | 1–38 °C |
| Refrigerant | R410A |
| Dimensions (L x W x H) | 18 x 20 x 34 inches |
To Next Page
