What to do if my Legend Brands Dri-Eaz LGR 6000Li Dehumidifier does not operate?
If your Legend Brands Dehumidifier isn't turning on, make sure the unit is switched on and properly plugged into a working wall outlet. Also, check the power cord connection.
Why does my Legend Brands Dehumidifier drip water when moving it?
If water drips out of your Legend Brands Dehumidifier when you move it, it's likely because the unit wasn't fully purged before being unplugged. Always purge the unit completely before moving it.
Overview of the LGR 6000Li dehumidifier, its features, and ideal applications for water damage restoration and structural drying.
Essential safety instructions covering electrical hazards, refrigerant risks, and proper unit handling to ensure user safety.
Guidance on registering your purchase for support and procedures for obtaining service or a return material authorization (RMA).
Detailed steps for setting up the unit upright, positioning the dehumidifier, extending the handle, and connecting the drain hose.
Instructions on using the i-Series Command Hub for controlling the dehumidifier, monitoring the environment, and viewing job status.
Explanation of error codes (ER4-ER9) and warning indicators (W1-W4) displayed on the control panel, with troubleshooting tips.
Steps to follow at the end of a job to ensure all water is removed from the unit before moving, including purge cycle and hose management.
Guidelines for safely transporting and storing the dehumidifier, emphasizing careful handling and protection from environmental factors.
Details the recommended maintenance schedule, safety precautions for servicing, and sensor care to ensure optimal performance.
Addresses common operational issues such as water drips, unit failure, or poor drying performance, providing causes and solutions.
Comprehensive list of technical specifications for the LGR 6000Li, including performance metrics, dimensions, and electrical requirements.
Lists the standard accessories provided with the unit and information on ordering optional replacement parts like air filters.
Information on accessing further product documentation online and guidelines for the environmentally responsible disposal of the unit.
Specific safety protocols and procedures for authorized service technicians when working with R32 refrigerant and decommissioning units.
General| Model | LGR 6000Li |
|---|---|
| Refrigerant | R410A |
| Operating Temperature Range | 33°F |
| Drain Hose Length | 40 feet |
| Power Supply | 115V / 60 Hz |
| Amps | 8.3 Amps |
| Watts | 950W |
To Next Page
